USB 2.0 Ranger® 23044-Port USB 2.0 100m Cat 5e Extender SystemUser Guide
Connecting a USB Device1. Install any software required to operate the USB device(s). Refer to the documentation for the USB device(s), as required
TroubleshootingThe following table provides troubleshooting tips. The topics are arranged in the order in which they should be executed in most situa
Contacting Technical SupportIf you are experiencing problems not referenced in the Troublehooting section, you may contact Icron Technical Support at
Obtaining Warranty ServiceTo obtain warranty service, you must first contact Icron Technologies Corporation within the warranty period for a Return Mat
Technical GlossaryCategory 5e (Cat 5e) Network Cabling Category 5e cable is commonly also referred to as Cat 5e. This cabling is available in either
SpecificationsRANGEDirect Connect Up to 100m (330 ft) over solid core Cat 5e or betterUSB DEVICE SUPPORTMaximum USB 2.0 Throughput Up to 480MbpsMaximum
Icron Technologies Corporation4664LougheedHighway,Suite221Burnaby, BC Canada V5C 5T5Tel: +1 604 638 3920 Fax: +1 604 638 3930 icron.com
Thank you for purchasing the USB 2.0 Ranger® 2304. Please read this guide thoroughly.This document applies to Part Numbers: 00-00347, 00-00348, 00-003
ContentsIntroduction ...3Ranger 2304-LAN Pro
IntroductionThis guide provides product information for the Ranger 2304 installation instructions, troubleshooting guidelines, and instructions for co
The LEX UnitThe Local Extender (LEX) unit connects to the computer using a standard USB 2.0 cable. Power for this unit is provided by the the host com
The REX UnitThe Remote Extender (REX) unit provides USB Type A ports for standard USB devices. The REX unit allows you to connect up to four USB devi
Installing the Ranger 2304 SystemRequirementsTo complete the installation, you will also require the following items that are not included with the pr
Installing the LEX Unit 1. Place the LEX unit near the computer.2. Connect the supplied USB cable between the LEX host port and a USB port on the ho
Checking the Installation1. OntheLEXandREXunits,checkthatthePower,Status,LinkandHostLEDsareon. • IftheHostorLinkLEDsare
Comments to this Manuals