Bb-electronics 105FXE-SC(ST)-15-POE - Manual User Manual

(Revised 8/5/2009) 1 105TX-POE & 105FX-POE Unmanaged Industrial Ethernet POE Switches User Manual & Installation G

(Revised 8/5/2009) 10 APPLYING POWER (Top View) Unscrew & Remove the DC Voltage Input Plug from the top header. Install the DC Power Cables int

(Revised 8/5/2009) 11 N-TRON GROUNDING TECHNIQUES FOR 105TX-POE AND 105FX-POE The grounding philosophy of any control system is an integral part of

(Revised 8/5/2009) 12 RJ45 CONNECTOR CRIMP SPECIFICATIONS Please reference the illustration below for your Cat5 cable specifications:

(Revised 8/5/2009) 13 TYPICAL APPLICATIONS STAR TOPOLOGY

(Revised 8/5/2009) 14 RING TOPOLOGY

(Revised 8/5/2009) 15 CONNECTING THE UNIT For the 100BaseFX Fiber Optic port (105FX-POE), remove the dust cap(s) from the fiber optic connector and c

(Revised 8/5/2009) 16 FCC STATEMENT This product complies with Part 15 of the FCC-A Rules. Operation is subject to the following conditions: (1) This

(Revised 8/5/2009) 17 Regulatory Approvals: Safety: UL Listed per ANSI/ISA-12.12.01-2000 (US and Canada) is listed for use in Class I, Div 2, Groups

(Revised 8/5/2009) 18 KEY SPECIFICATIONS Physical Height: 3.5” (8.89cm) Width: 1.489” (3.78cm) Depth: 3.53” (8.96cm) Weight

(Revised 8/5/2009) 19 N-TRON Limited Warranty N-TRON, Corp. warrants to the end user that this hardware product will be free from defects in workman

(Revised 8/5/2009) 2 Industrial Power over Ethernet Installation Guide 105TX-POE 105FX-XX-POE 105FXE-XX-YY-POE Where: XX = ST or

(Revised 8/5/2009) 3 Copyright, © N-TRON Corp., 2008 820 S. University Blvd., Suite 4E Mobile, AL USA 36609 All rights reserved. Reproduction, adapta

(Revised 8/5/2009) 4 GENERAL SAFETY WARNINGS WARNING: Do not operate the equipment in the presence of flammable gasses or fumes. Operating electri

(Revised 8/5/2009) 5 HAZARDOUS LOCATION INSTALLATION REQUIREMENTS 1. This equipment is suitable for use in Class I, Div 2, Groups A, B, C, and D, o

(Revised 8/5/2009) 6 Functional Overview The 105TX-POE and 105FX-POE Power over Ethernet Unmanaged Industrial Ethernet Switches are designed to prov

(Revised 8/5/2009) 7 PACKAGE CONTENTS Please make sure the switch package contains the following items: 1. 105TX-POE or 105FX(E)-POE 2. Instructio

(Revised 8/5/2009) 8 DIN-Rail Mounting Install the unit in a standard DIN rail. Recess the unit to allow at least 2” of horizontal clearance for CAT

(Revised 8/5/2009) 9 FRONT PANEL From Top to Bottom: Power LED POE POE Status LED SPD Speed LED (105