Quick Start User Guide GW-7553 PROFIBUS/Modbus TCP Gateway 1. Introduction This manual introduces the GW-7553's basic setting and operating q
PROFIBUS connection Here we recommend users to use the standard PROFIBUS cable and connector (DB9 male). It is only needed to use D-type connector via
on The connection is error with PROFIBUS Master device or PROFIBUS system configuration is not correct. off PROFIBUS system configuration is correct.
Step 1: Click insert slave button in the PROFIBUS configuration tool. Step 2: Choose GW-7553 device and click Add button.
Change “Modbus Type” to Slave, “Modbus Format” to Modbus TCP and click <OK> button ¾ Set the modules of the GW-7553 The modules of the G
Click <Online->Download> to download the setting into PROFIBUS Master station ¾ Set the network configuration of the GW-7553 Set the netw
5. GW-7553 module communication test This demo uses utility “MBTCP” on the PC to communicate with the GW-7553. The User can download it on the web sit
¾ PROFIBUS output test --Send Command to read DI of the GW-7553 The user needs to input command (” 01 02 00 00 00 10”) in MBTCP and click <Send Co
Comments to this Manuals