Bb-electronics VFG1000 - Quick Start Guide User Manual

Browse online or download User Manual for Accessories communication Bb-electronics VFG1000 - Quick Start Guide. B&B Electronics VFG1000 - Quick Start Guide User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 8
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
1
CONVERTS NUMEROUS PROTOCOLS SIMULTANEOUSLY
EXTENSIVE BUILT-IN DRIVER LIST ALLOWS EASY DATA
MAPPING TO PLCs, PCs, AND SCADA SYSTEMS
10 BASE-T/100BASE-TX ETHERNET PORT SUPPORTS FOUR
SIMULTANEOUS PROTOCOLS
INDEPENDENT SERIAL PORTS PROVIDE VIRTUALLY
UNLIMITED INTEGRATION METHODS
SUPPORTS UP TO NINE PROTOCOLS SIMULTANEOUSLY(with
expansion card)
GENERAL DESCRIPTION
The Vlinx Fieldbus Gateway was designed to act as a nexus for industrial data
collection and management. With three built in serial ports and a 10 Base-T/100
Base-TX Ethernet port, the unit performs protocol conversion, allowing
disparate devices to communicate seamlessly with one another. The Ethernet
port supports up to four protocols simultaneously so even Ethernet to Ethernet
conversion may be performed.
The CompactFlash card allows new configuration files to be loaded into the
Vlinx Fieldbus Gateway. The USB port may be used for blazing fast file
downloads, or to mount the Vlinx Fieldbus Gateway’s CompactFlash card as an
external drive to your PC. The Vlinx Fieldbus Gateway’s DIN rail mounting
saves time and panel space and snaps easily onto standard top hat (T) profile
DIN rail.
SOFTWARE
The Vlinx Fieldbus Gateway is programmed with Fieldbus Gateway Manager
for Windows
®
2000 or later platforms. The software is an easy to use graphical
interface which can be purchased as part of a kit that includes a manual and
cables, or downloaded free of charge.
SAFETY SUMMARY
All safety related regulations, local codes and instructions that appear in the
manual or on equipment must be observed to ensure personal safety and to
prevent damage to either the instrument or equipment connected to it. If
equipment is used in a manner not specified by the manufacturer, the protection
provided by the equipment may be impaired.
Do not use the controller to directly command motors, valves, or other
actuators not equipped with safeguards. To do so can be potentially harmful to
persons or equipment in the event of a fault to the controller. An independent
and redundant temperature limit indicator with alarm outputs is strongly
recommended.
CompactFlash is a registered trademark of CompactFlash Association.
VLINX FIELDBUS GATEWAY
CAUTION: Risk of Danger.
Read complete instructions prior to
installation and operation of the unit.
5.30 (134.7)
RS232
ETHERNET
CF
STS
USB/PG
RS485
RS232/PG
3.09 (78.5)
4.15 (105.4)
DIMENSIONS In inches (mm)
FOR USE IN HAZARDOUS LOCATIONS:
Class I, Division 2, Groups A, B, C, and D
C
US LISTED
U
L
R
3PWL
PROGRAMMABLE
CONTROLLERS
C
US LISTED
U
L
R
IND. CONT. EQ.
34AD
WARNING - EXPLOSION HAZARD - SUBSTITUTION OF
COMPONENTS MAY IMPAIR SUITABILITY FOR CLASS I,
DIVISION 2
THIS EQUIPMENT IS SUITABLE FOR USE IN CLASS I,
DIVISION 2, GROUPS A, B, C, D, OR NON-HAZARDOUS
LOCATIONS ONLY
Phone: (815) 433-5100
Fax: (815) 4334-5104
www.bb-elec.com
VFG1000--qsg
LP0832X
Effective 01/10
Page view 0
1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - VLINX FIELDBUS GATEWAY

1 CONVERTS NUMEROUS PROTOCOLS SIMULTANEOUSLY EXTENSIVE BUILT-IN DRIVER LIST ALLOWS EASY DATA MAPPING TO PLCs, PCs, AND SCADA SYSTEMS 10 BASE-T/1

Page 2 - HARDWARE

2SPECIFICATIONS1. POWER: 24 VDC ± 10% 200 mA min., without expansion card1 Amp maximum with expansion card fittedMust use NEC Class 2 or Limited Power

Page 3 - EMC INSTALLATION GUIDELINES

3EMC INSTALLATION GUIDELINESAlthough B&B Electronics Products are designed with a high degree of immunity to Electromagnetic Interferenc

Page 4 - Ethernet (Crossover)

4COMMUNICATION PORTSCOMMON+24 VDC+24N/CCOMMWIRINGPOWER CONNECTIONPROGRAMMING PORTSRS232RTSCOMMTxCOMMCTSRxYELLOW LEDGREEN/AMBER LEDETHERNETRS232CFRS485

Page 5 - TROUBLESHOOTING

ETHERNETRS232RS485USB/PGRS232/PGCFSTSStandard Ethernet cableCTSTxCOMMRxRTSCOMMRS232TxBRxBRxATxATxBCOMMTxENTxARS485GREEN/AMBER LEDYELLOW LEDETHERNETRS2

Page 6 - RS485 2-WIRE

6CONFIGURING A FIELDBUS GATEWAYThe Fieldbus Gateway is configured using Fieldbus Gateway Manager software. Updates to the software for new fea

Page 7 - ORDERING INFORMATION

7LEDSSTS – STATUS LEDThe green Status LED provides information regarding the state of the Fieldbus Gateway. This includes indication of the

Comments to this Manuals

No comments