CONFIGURED USING VLINX FIELDBUS GATEWAY MANAGER
DIGITALLY ISOLATED CANopen PORT CAPABLE OF
COMMUNICATING WITH ANY CANopen DEVICE
EASY INSTALLATION
GENERAL DESCRIPTION
The Vlinx Fieldbus Gateway contains a proprietary expansion port which
provides a high speed, parallel architecture that extends the functionality and
flexibility of the platform. This approach allows these products to evolve
concurrently with the latest advances in communications and standards, without
sacrificing performance. This high bandwidth channel has significantly greater
throughput when compared to the traditional (external) serial gateway approach.
The VFG9000-CAN option card adds a CANopen communication port to the
series. This isolated card protects user equipment from potentially harmful
ground loops while providing the ability to communicate to any high speed
CANopen device. The VFG9000-CAN option card has a termination resistor
built-in, which is selectable via a jumper setting.
The VFG9000-CAN communication card is easily installed by removing the
blank expansion port cover of your Fieldbus Gateway, and plugging the
VFG9000-CAN card into the expansion port. Configuration is simple using
B&B Electronics’ free Fieldbus Gateway Manager software.
SAFETY SUMMARY
All safety related regulations, local codes and instructions that appear in the
literature or on equipment must be observed to ensure personal safety and to
prevent damage to either the instrument or equipment connected to it. If
equipment is used in a manner not specified by the manufacturer, the protection
provided by the equipment may be impaired.
Do not use the controller to directly command motors, valves, or other
actuators not equipped with safeguards. To do so can be potentially harmful to
persons or equipment in the event of a fault to the controller.
ORDERING INFORMATION
DESCRIPTION PART NUMBER
CANopen option card for Fieldbus Gateway VFG9000-CAN
CONTENTS OF PACKAGE
- VFG9000-CAN option card
- This hardware bulletin
SPECIFICATIONS
1. POWER REQUIREMENTS: 24 V @ 50 mA max. Power is supplied to the
option card from the main board of the Fieldbus Gateway.
2. COMMUNICATIONS:
CANopen Port: The CANopen port has format and baud rates that are
software programmable up to 1M baud and are digitally isolated. This port
may be configured for various CANopen protocols. Check www.bb-elec.com
for currently supported protocols.
Isolation from VFG9000-CAN Communication ports to the Fieldbus
Gateway:1000 VDC for 1 minute.
3. CERTIFICATIONS AND COMPLIANCES:
Refer to main unit manual or “Agency Approvals” section of B&B
Electronics’ website for agency certifications.
ELECTROMAGNETIC COMPATIBILITY
Emissions and Immunity to EN 61326: Electrical Equipment for Measurement,
Control and Laboratory use.
Reference Fieldbus Gateway unit for EMC specifications
4. ENVIRONMENTAL CONDITIONS:
Refer to the specifications of the Fieldbus Gateway you are installing this
card in.
5. CONSTRUCTION: For indoor use only. Installation Category II, Pollution
Degree 2.
6. INSTALLATION REQUIREMENTS: See “Installing the VFG9000-CAN
Option card” for more details.
7. WEIGHT: 2.3 oz (65.2 g)
CANopen OPTION CARD FOR VLINX FIELDBUS GATEWAY
CAUTION: Risk of Danger.
Read complete instructions prior to
installation and operation of the unit.
1
TX/RX
1
2
4 CAN +
CAN -
GND
+
-
ISOLATING
DC : DC
A
B
BLOCK DIAGRAM
Phone: (815) 433-5100
Fax: (815) 4334-5104
www.bb-elec.com
VFG9000-CAN-1012qsg
LP0834X
Effective 01/10
WARNING - EXPLOSION HAZARD - SUBSTITUTION OF
COMPONENTS MAY IMPAIR SUITABILITY FOR CLASS I,
DIVISION 2
THIS EQUIPMENT IS SUITABLE FOR USE IN CLASS I,
DIVISION 2, GROUPS A, B, C, D, OR NON-HAZARDOUS
LOCATIONS ONLY
(2 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals