Bb-electronics 850-10953-DC - Manual User Manual

iMediaChassis/3 Operation Manual

10 About iConfig iConfig is a configuration utility (part of iView²) that lets users quickly and easily complete the first stages of SNMP configuratio

11 Main Serial/Telnet Configuration Screen After running through an initial self-test, the screen will display the following message: “<Press Enter

12 NOTE The F2 key functions as a Delete key on VT-100 terminal emulators. Reboot after making any modifications to the Saved Values or changes will n

13 Assigning Trap Destinations The manageable device sends Traps to a management PC when a certain event takes place. To enter a Trap destination, pr

14 Type the name of the action and press Enter. • tasks Displays the task list including the task priority. • memory Displays the memory usage. • cle

15 Before using iView² iView² is a network management application designed for use on the IMC Networks intelligent networking devices. It features a

16 When Not Using iView² When using an application other than iView² for management, integrate the SNMP vendor files (a.k.a. MIBs) into the applicatio

17 Alarm Reset This feature is available on the fault-tolerant (dual-power supply) model of the iMediaChassis/3. When one power supply malfunctions,

18 Specifications DC Input: ± 36 to 72 VDC maximum @ 50 watts AC Input: 100 to 240 VAC +10% @ 50 watts Operating Temperature: 32° to 122° F (0° to 50

19 IMC Networks Technical Support Telephone: (949) 465-3000 Toll Free: (800) 624-1070 (U.S.A. and Canada) Europe: +32-16-550880 FAX: (949) 465-30

ii FCC Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B computing device, pursu

19772 Pauling • Foothill Ranch, CA 92610-2611 USA TEL: (949) 465-3000 • FAX: (949) 465-3020 www.imcnetworks.com © 2007 IMC Networks. All ri

iii Table of Contents FCC Radio Frequency Interference Statement ...ii Warranty...

4 About the iMediaChassis/3 The iMediaChassis/3 is a modular chassis platform designed for use with the IMC Networks SNMP-manageable series of modules

5 Installing the iMediaChassis/3 Before installing the application modules into an iMediaChassis/3, install the chassis first. When installing the ch

6 Installing Management Modules An SNMP Management Module must be installed in the iMediaChassis/3 to enable module and chassis management (except w

7 Connecting Chassis and Modules An iMediaChassis/3 with an installed management module connects to the LAN via an external 10/100 twisted pair connec

8 The switch has two settings. OFF is the normal operating position and ON is the locked position. IMPORTANT USAGE INFORMATION Leave the SNMP Write L

9 7. Reboot the SNMP management module with the reboot command to enable changes. 8. After rebooting, set the SNMP Write Lock switch back to OFF. T