Bb-electronics 850-18610 - Manual User Manual

IE-iMcV-2xLIM, TX/SFP Operation Manual

7 Link Fault Pass-Through (LFPT) Link Fault Pass-Through (LFPT) is a troubleshooting feature that combines TX and FX LinkLoss from both the local and

8 If the twisted pair port on the other device does not have the ability to Auto Negotiate or if the 100 Mbps half-duplex connection is desired, then

9 LED Operation Each IE-iMcV-2xLIM, TX/SFP module features diagnostic LEDs that provide information on features and ports. FXLL Glows green when FX L

10 Installation Troubleshooting  During installation, first test the fiber and twisted pair connections with all troubleshooting features disabled, t

11 Specifications Environmental Operating Temperature -40°F to +176°F (-40°C to +80°C) Storage Temperature -40°F to +176°F (-40°C to +80°C) Humidity 5

12 Fiber Optic Cleaning Guidelines Fiber Optic transmitters and receivers are extremely susceptible to contamination by particles of dirt or dust, whi

13 WARNING! Integrated circuits and fiber optic components are extremely susceptible to electrostatic discharge damage. Do not handle these compone

14 Certifications CE: The products described herein comply with the Council Directive on Electromagnetic Compatibility (2004/108/EC). Europea

International Headquarters B&B Electronics 707 Dayton Road Ottawa, IL 61350 USA Phone (815) 433-5100 — General Fax (815) 433-5105 Website

ii FCC Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B computing device, pursu

iii Table of Contents FCC Radio Frequency Interference Statement ... ii Warranty ...

1 About the IE-iMcV-2xLIM, TX/SFP The IE-iMcV-2xLIM, TX/SFP is a Fast Ethernet module which provides two conversions of 100Base-TX twisted pair to 100

2 Installing an iMcV-Modules The iMcV-Modules install in B&B Electronics’ SNMP manageable iMediaChassis series or in any MediaChassis. NOTE All

3  When non-Configuration Control iMcV-modules are placed in a managed chassis, the iMcV-module’s DIP Switches are ignored and the iMcV-module is con

4 IE-iMcV-2xLIM, TX/SFP and Configuration Control DIP Switch on S1 Feature Default Setting 1 Auto Negotiation (AN) (Port A) ON 2 FX LinkLoss (FXLL

5 settings.

6 FX LinkLoss, TX LinkLoss, Link Fault Pass-Through, Far End Fault IE-iMcV-2xLIM, TX/SFP modules include the troubleshooting features, TXLL, FXLL, FE