McPC 10/100 (ISA & PCI Versions) Operation Manual
7 Crossover/Pass-Through Switch
8 LED Indicators (PCI Version) The McPC 10/100 features four diagnostic LEDs. The following are the LED functions on the twisted pair port:
9
10 ISA Version Installing the McPC 10/100 (ISA Version) Offering plug-and-play operation, the McPC 10/100 comes ready to install, utilizing power fro
11 Configuring the McPC 10/100 (ISA Version) Before installing, configure McPC 10/100 for desired features using the DIP Switch located as shown below
12 Modes of Operation (ISA Version) The McPC 10/100 features three modes of operation: Auto Negotiation mode, Force-10 mode and Force-100 mode. Config
13 Force 100 Mode There is no Auto Negotiation in either of the Force modes. Auto Negotiation (ISA Version) When connecting two McPC 10/100s between
14 Link Fault Detection (LFD) is only available when using Force 10 or Force 100 mode. It is not available in Auto Negotiation mode. When LFD is enab
15 Crossover/Pass-Through Switch
16 LED Indicators (ISA Version) The McPC 10/100 features four diagnostic LEDs. The following are the LED functions on the twisted pair port:
ii FCC Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B computing device, pursu
17 NOTE Twisted pair AND fiber optic cables must be connected, and the twisted pair crossover/pass-through switch set correctly, before either LNK L
18 Specifications (PCI and ISA Versions) Environmental Operating Temperature 32° - 104° F (0° - 40° C) Storage Temperature 0° - 160° F (-20° - 71° C)
19 Fiber Optic Cleaning Guidelines Fiber Optic transmitters and receivers are extremely susceptible to contamination by particles of dirt or dust, whi
20 Safety Certifications UL/CUL: Listed to Safety of Information Technology Equipment, including Electrical Business Equipment. CE: The produc
International Headquarters B&B Electronics 707 Dayton Road Ottawa, IL 61350 USA Phone (815) 433-5100 — General Fax (815) 433-5105 Website
iii Table of Contents FCC Radio Frequency Interference Statement ... ii Warranty ...
1 About the McPC 10/100 The McPC TX/FX is an IEEE 802.3 single-conversion PC media converter card that converts: 10Base-T twisted pair and 10Base-FL
2 PCI Version Installing the McPC 10/100 (PCI Version) Offering plug-and-play operation, the McPC 10/100 comes ready to install, utilizing power from
3 The table below shows the DIP Switch settings for McPC 10/100: Feature Switch # Function Default LFD 5 Link Fault Detection (Available in For
4 Modes of Operation (PCI Version) The McPC 10/100 features three modes of operation: Auto Negotiation mode (AN), Force-10 mode and Force-100 mode. C
5 Force 100 Mode There is no Auto Negotiation in either of the Force modes. Auto Negotiation (PCI Version) When connecting two McPC 10/100s between
6 Link Fault Detection (PCI Version) Link Fault Detection (LFD) is only available when using Force 10 or Force 100 mode. It is not available in Auto N
Comments to this Manuals