Bb-electronics ADAM-5000E - Datasheet User Manual download pdf

Features

Distributed DA&C Systems

All product specifications are subject to change without notice Last updated : 20-Jan-2006

ADAM-5000/485

ADAM-5000E

Introduction

The ADAM-5000/485 and ADAM-5000E systems use the EIA RS-485 communication protocol. This is the industry's most widely used, balanced, bidirectional transmission line

standard. RS-485 was speciﬁcally developed for industrial applications to transmit and receive data at high rates over long distances.

Speciﬁcations

Control System

 CPU 16-bit 80188 microprocessor

 I/O Slots ADAM-5000/485: 4

ADAM-5000E: 8

 LED Indicators Power, CPU, communications

 Watchdog Timer 1.6 sec. (System)

Communications

 Command Format ASCII command/response protocol, Modbus/RTU

 Communication RS-485: 1.2 km (4000 feet)

Distance

 Data Format Asynchronous. 1 start bit, 8 data bits, 1 stop bit, no

parity

 Network Protocols Programming link: RS-232 (3-wire: TX, RX, GND)

Communication: RS-485 (2-wire)

 Reliability Check Communication error checking with checksum

 Max. Nodes 256 (in RS-485 daisy-chain network)

 Speeds (kbps) 1.2, 2.4, 4.8, 9.6, 19.2, 38.4, 57.6, and 115.2

Power

 Power Consumption 1.0 W (ADAM-5000/485) (not including I/O modules)

4.0 W (ADAM-5000E) (not including I/O modules)

 Power Input Unregulated 10 ~ 30 V

Software

 Driver Support Windows DLL, OPC server, Wonderware

InTouch

Intellution

, iFIX

, Citect.

Protection

 Communication Line 2500 V

(ADAM-5000/485)

Isolation 3000 V

(ADAM-5000E)

 Communication Power 3000 V

Isolation

 I/O Module Isolation 3000 V

 Transient Protection RS-485 communication lines, power input

 Power Reversal Yes

Protection

General

 Certiﬁcations CE, FM

 Connectors 1 x DB9-M/DB9-F/screw terminal for RS-485

(communication)

1 x DB9-F for RS-232 (conﬁguration)

1 x Screw-terminal for power input

 Dimensions (WxHxD) 4-slot: 231 x 110 x 75 mm

8-slot: 355 x 110 x 75 mm

 Enclosure ABS+PC

 Mounting DIN 35 rail, wall, rack (with mounting kit)

Environment

 Humidity 5 ~ 95%, non-condensing

 Operating Temperature -10 ~ 70° C (14 ~ 158° F)

 Storing Temperature -25 ~ 85° C (-13 ~ 185° F)

Ordering Information

 ADAM-5000/485 Distributed DA&C System Based on RS-485 (4 slot)

 ADAM-5000E Distributed DA&C System Based on RS-485 (8 slot)

 PCLS-OPC/ADM OPC Server for ADAM-4000/5000 Series (RS-485)

 PCLS-OCX ActiveX Control for Data Acquisition and Control

 PCLS-ADAMVIEW32 ADAMView Data Acquisition Software

 RS-485 Communication for easy installation and networking

 4 or 8 slots for up to 128 points data monitoning card control in one

module

 Extensive Software support, inclucles windows DLL drivers, OCX drivers,

OPC server and popular HMI/SCADA software drivers.

 Seamlessly inteqrated with easy-to-use ADAMView data acquisition

software.

4-Slot Distributed DA&C System

for RS-485 Networks

8-Slot Distributed DA&C System

for RS-485 Networks

1 2

Summary of Contents

Page 1 - ADAM-5000E

FeaturesDistributed DA&C SystemsAll product specifications are subject to change without notice Last updated : 20-Jan-2006ADAM-5000/485ADAM-5000E

Page 2 - Feature Details

www.advantech.com/productsOnline DownloadFeature DetailsTwo-wire CommunicationADAM-5000/485 and ADAM-5000E systems use a single twisted pair of wires

Comments to this Manuals

No comments

Bb-electronics ADAM-5000E - Datasheet User Manual

Browse online or download User Manual for Accessories communication Bb-electronics ADAM-5000E - Datasheet. B&B Electronics ADAM-5000E - Datasheet User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Accessories communication Bb-electronics ADAM-5000E - Datasheet