EIR508 Series-1713qsg
o Ethernet Switch
o CD with Support Manual
o This Quick Start Guide
o Panel Mount Bracket
o IP Address: 192.168.16.1
o Subnet Mask: 255.255.255.0
o Gateway: 192.168.16.254
o User Name: root, Password: root
o Record the switch’s MAC Address in the space
provided. The MAC Address is printed on the product
label. Provide the MAC Address to your Network
Administrator. The Network Administrator should
provide an IP Address, Subnet Mask, and Gateway.
o Select a mounting location and install with the attached
DIN rail clip or included panel mount kit.
o Connect power to the switch
o 12 to 48 VDC
o Redundant DC input is available with fault
contacts.
Enable port 1 Alarm
(If port 1 link fails, the fault LED will light)
Enable port 2 Alarm
(If port 2 link fails, the fault LED will light)
Enable port 3 Alarm
(If port 3 link fails, the fault LED will light)
Enable port 4 Alarm
(If port 4 link fails, the fault LED will light)
Enable port 5 Alarm
(If port 5 link fails, the fault LED will light)
Enable port 6 Alarm
(If port 6 link fails, the fault LED will light)
Enable port 7 Alarm.
(If port 7 link fails, the fault LED will light)
Enable port 8 Alarm
(If port 8 link fails, the fault LED will light)
Disable the ring master function.
Enable the switch as the ring master
in the redundant ring group.
The Switch is powered off
Power Source 1 is available
Power Source 1 is unavailable
Power Source 1 is available
Power Source 2 is unavailable
Power Source failure or Port Failure
Ring Master (Master of a redundant ring)
The switch is not a Ring Master
The port is receiving or transmitting packets
Elinx Managed Ethernet Switch
EIR508 Series
Comments to this Manuals